電源 投入前
# ls -l messages syslog -rw-r--r-- 1 root root 0 Nov 13 21:30 messages -rw-r----- 1 root root 0 Nov 13 21:30 syslog # lsmod | grep usb usb-uhci 21456 0 (unused) usbcore 58060 1 [usb-uhci] # lsmod | grep printer # dmesg | grep usb usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 21:56:15 May 27 2008 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0x1000, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hiddev usb.c: registered new driver hid usb.c: deregistering driver hid usb.c: deregistering driver hiddev
電源 投入後
Nov 13 22:35:58 sv kernel: hub.c: new USB device 00:07.2-2, assigned address 3 Nov 13 22:35:58 sv murasaki.usb[444]: usb device is added Nov 13 22:35:58 sv murasaki.usb[444]: vendor:0x4b8 product:0x81c Dclass:0x0 Dsubclass:0x0 Dprotocol:0x0 Iclass:0xff Isubclass:0xff Iprotocol:0xff Nov 13 22:35:58 sv murasaki.usb[444]: The device match nothing in mapfile Nov 13 22:35:58 sv murasaki.usb[444]: Please change MODULE in following line to the appropriate module name, add it to /etc/murasaki/murasaki.usbmap Nov 13 22:35:58 sv murasaki.usb[444]: MODULE 0x0383 0x4b8 0x81c 0 0 0x0 0x0 0x0 0xff 0xff 0xff 0x00000000 Nov 13 22:35:58 sv murasaki.usb[445]: usb device is added Nov 13 22:35:58 sv murasaki.usb[446]: usb device is added Nov 13 22:35:58 sv murasaki.usb[446]: vendor:0x4b8 product:0x81c Dclass:0x0 Dsubclass:0x0 Dprotocol:0x0 Iclass:0x8 Isubclass:0x6 Iprotocol:0x50 Nov 13 22:35:58 sv murasaki.usb[446]: MATCH(alias-sd) -> match_flags:0x180 vendor:0x0 product:0x0 Dclass:0x0 Dsubclass:0x0 Dprotocol:0x0 Iclass:0x8 Isubclass:0x6 Iprotocol:0x0 Nov 13 22:35:58 sv murasaki.usb[446]: MATCH(usb-storage) -> match_flags:0x380 vendor:0x0 product:0x0 Dclass:0x0 Dsubclass:0x0 Dprotocol:0x0 Iclass:0x8 Isubclass:0x6 Iprotocol:0x50 Nov 13 22:35:58 sv murasaki.usb[445]: vendor:0x4b8 product:0x81c Dclass:0x0 Dsubclass:0x0 Dprotocol:0x0 Iclass:0x7 Isubclass:0x1 Iprotocol:0x2 Nov 13 22:35:58 sv murasaki.usb[445]: MATCH(printer) -> match_flags:0x80 vendor:0x0 product:0x0 Dclass:0x0 Dsubclass:0x0 Dprotocol:0x0 Iclass:0x7 Isubclass:0x0 Iprotocol:0x0 Nov 13 22:35:58 sv murasaki.usb[445]: MATCH(printer) -> match_flags:0x380 vendor:0x0 product:0x0 Dclass:0x0 Dsubclass:0x0 Dprotocol:0x0 Iclass:0x7 Isubclass:0x1 Iprotocol:0x2 Nov 13 22:35:58 sv murasaki.usb[445]: Loading printer Nov 13 22:35:58 sv murasaki.usb[446]: Dependence(usb-storage) was found Nov 13 22:35:58 sv murasaki.usb[446]: Dependence(sd_mod) was found Nov 13 22:35:58 sv murasaki.usb[446]: Dependence(scsi_mod) was found Nov 13 22:35:58 sv murasaki.usb[446]: Loading usb-storage Nov 13 22:35:58 sv murasaki.usb[446]: Loading sd_mod Nov 13 22:35:58 sv murasaki.usb[446]: Loading scsi_mod Nov 13 22:35:59 sv kernel: usb.c: registered new driver usblp Nov 13 22:35:59 sv kernel: printer.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x081C Nov 13 22:35:59 sv kernel: printer.c: v0.13: USB Printer Device Class driver Nov 13 22:35:59 sv kernel: Initializing USB Mass Storage driver... Nov 13 22:35:59 sv kernel: usb.c: registered new driver usb-storage Nov 13 22:35:59 sv kernel: scsi0 : SCSI emulation for USB Mass Storage devices Nov 13 22:35:59 sv kernel: sda: Unit Not Ready, sense: Nov 13 22:35:59 sv kernel: sda: I/O error: dev 08:00, sector 0 Nov 13 22:35:59 sv kernel: USB Mass Storage support registered. # cat syslog Nov 13 22:35:58 sv kernel: usb.c: USB device 3 (vend/prod 0x4b8/0x81c) is not claimed by any active driver. Nov 13 22:35:59 sv kernel: Vendor: EPSON Model: PM Storage Rev: 1.00 Nov 13 22:35:59 sv kernel: Type: Direct-Access ANSI SCSI revision: 02 Nov 13 22:35:59 sv kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 Nov 13 22:35:59 sv kernel: Current 00:00: sns = 70 2 Nov 13 22:35:59 sv kernel: ASC=3a ASCQ= 0 Nov 13 22:35:59 sv kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 Nov 13 22:35:59 sv kernel: sda : READ CAPACITY failed. Nov 13 22:35:59 sv kernel: sda : status = 1, message = 00, host = 0, driver = 08 Nov 13 22:35:59 sv kernel: Current sd00:00: sns = 70 2 Nov 13 22:35:59 sv kernel: ASC=3a ASCQ= 0 Nov 13 22:35:59 sv kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 Nov 13 22:35:59 sv kernel: sda : block size assumed to be 512 bytes, disk size 1GB. Nov 13 22:35:59 sv kernel: I/O error: dev 08:00, sector 0 Nov 13 22:35:59 sv kernel: unable to read partition table # lsmod | grep usb usb-storage 60576 0 (unused) usb-uhci 21456 0 (unused) usbcore 58060 1 [usb-storage printer usb-uhci] # lsmod | grep printer printer 7392 0 (unused) usbcore 58060 1 [usb-storage printer usb-uhci] # dmesg | grep usb ... usb.c: USB device 2 (vend/prod 0x4b8/0x81c) is not claimed by any active driver. usb.c: registered new driver usblp printer.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x081C usb.c: registered new driver usb-storage
にゃんたろう 拝！
2008年11月13日 (木) 22:28:14 JST 作成