http://www.no-ip.com/downloads.php から 入手 します。 Windows Mac Linux の ように ３種類あるので 今回は Linux に 対応するものを 選びます それを インストール します。README.FIRSTを 見る；英 語ですよ？
# pwd
/usr/local/src/lang/dns_no-ip
# ls -l noip-duc-linux.tar.gz
-rw------- 1 mm users 71210 May 4 14:59 noip-duc-linux.tar.gz
# tar zxvf noip-duc-linux.tar.gz
# cd noip-2.1.1/
# pwd
/usr/local/src/lang/dns_no-ip/noip-2.1.1
# make
gcc -Wall -g -O2 -Dlinux -DPREFIX=\"/usr/local\" noip2.c -o noip2
# make install
if [ ! -d /usr/local/bin ]; then mkdir -p /usr/local/bin;fi
if [ ! -d /usr/local/etc ]; then mkdir -p /usr/local/etc;fi
cp noip2 /usr/local/bin/noip2
/usr/local/bin/noip2 -C -Y -c /tmp/no-ip2.conf
Auto configuration for Linux client of no-ip.com.
Please enter the login/email string for no-ip.com
/* ### 要求に 対して メール アドレスを 入力します */
Please enter the login/email string for no-ip.com nyanta@rou.co.cat
/* ### 登録したものであること 次の パスワードも 同様です。 */
Please enter the password for user 'nyanta@rou.co.cat'
/* ### パスワードを 入力します 登録時の もの */
Please enter the password for user 'nyanta@rou.co.cat' n#Y&a5t!
/* ### 実際は ************ の 様に なって 見えませんが 公開します */
Only one host [にゃんたろう.no-ip.info] is registered to this account.
It will be used.
Please enter an update interval:[30]
/* ３０分毎の ことの 様ですので このまま Enter です ## Only Enter */
Do you wish to run something at successful update?[N] (y/N) N
/* N で 処理します */
New configuration file '/tmp/no-ip2.conf' created.
mv /tmp/no-ip2.conf /usr/local/etc/no-ip2.conf
#
/* rc.local で 起動処理を 駄衛門様に お願いです Edit rc.local */
# diff -s rc.local bk_rc.local
69,74d68
<
< ## add Wed May 4 22:16:38 JST 2005
< ## from http://www.slackwarepl.eu.org/content/view/27/2/
< if [ -x /etc/rc.d/rc.noip2 ]; then
< /etc/rc.d/rc.noip2 start
< fi
/* これだけ 追加 しました 内容は 上記のもの を頂きました */
/* rc.noip2 の 内容の 必要な 部分の 抜粋 です */
# head -20 rc.noip2
#! /bin/sh
#/etc/rc.d/rc.noip2
case "$1" in
start)
echo "Starting noip2."
/usr/local/bin/noip2
;;
stop)
echo -n "Shutting down noip2."
killproc -TERM /usr/local/bin/noip2
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
exit 0
# http://www.slackwarepl.eu.org/content/view/27/2/
/* 再起動で 確認 しませう */
# shutdown -r now
# ps ax | grep noip |sed -e q
101 ? S 0:00 /usr/local/bin/noip2
# cat /var/log/messages | grep noip
May 4 22:58:49 nyan noip2[101]: v2.1.1 daemon started with NAT enabled
May 4 22:59:00 nyan noip2[101]: にゃんたろう.no-ip.info was already set to
\6k1.21n1.j6b2.1as7.
/* 良いのでしょう */
/* 全て 終わらせます adsl modem も 勿論 停止 そして 全て 起動します 確認の為 */
# ps ax | grep noip | sed -e q
101 ? S 0:00 /usr/local/bin/noip2
# cat /var/log/syslog | grep noip
# cat /var/log/messages | grep noip
May 4 23:15:21 nyan noip2[101]: v2.1.1 daemon started with NAT enabled
May 4 23:15:32 nyan noip2[101]: にゃんたろう.no-ip.info set to 2u8.2c1.1e7.h8
/* ブラウザで いけてるか どうか 確認 します */
$ mozilla &
/* Input : 192.168.3.11 ブラウザに 宛先を 入力します */
/* Input : user nyan ユーザーの 名前を 入力 */
/* Input : passwd n$y!a&n# パスワードを 入力 */
/* 画面で ネットワークの アドレスを 確認 しておきます */
/* poa0: flags=UP|POINTOPOINT|RUNNING|SIMPLEX mtu=9178 */
/* inet 2u8.2c1.1e7.h8 destination 6b1.2f1.6t2.1f */後 no-ip の 設定画面で 合致 してる事の 確認を します。 http://www.no-ip.com/tips.php/id/13 ここが 参考に なるようです 現在の所 パスワード 変更すると 再度 インストールする必要が あるのだろう か？ 調査 必要
README.FIRST を 良く読むのが 一番かいな！
You will need to re-create the datafile whenever your account or password
changes or when you add or delete hosts and/or groups at www.no-ip.com
Each invocation of noip2 with '-C' will destroy the previous datafile.
その様です
上へ ；下へREADME.FIRST を 参考までに
This file describes noip2, a second-generation Linux client for the
no-ip.com dynamic DNS service.
NEW: This code will build and run on Solaris/Intel and BSD also.
Edit the Makefile for Solaris and the various BSDs.
For BSD users wanting to use a tun interface, see below.
Let me know about any other changes needed for noip2 to
operate correctly on your non-Linux OS.
Please read this short file before using noip2.
###########################################################################
HOW TO BUILD AN EXECUTABLE FOR YOUR SYSTEM
The command
make
will build a binary of the noip2 client that will run on your system.
If you do not have 'make' installed and you have an i686 Linux machine
with libc6, a binary for i686 systems is located in the binaries
directory called noip2-Linux. Copy that binary to the build directory
'cp binaries/noip2-Linux noip2'
The command
make install
(which must be run as root) will install the various pieces to their
appropriate places. This will ask questions and build a configuration
data file.
See below if you can't become root or can't write in /usr/local/*.
###########################################################################
HOW TO USE THE CLIENT WITHOUT READING THE REST OF THIS TEXT
Usual operation?
/usr/local/bin/noip2 -C configure a client
/usr/local/bin/noip2 run a client
/usr/local/bin/noip2 -S display info about running clients
/usr/local/bin/noip2 -D pid toggle the debug state for client pid
/usr/local/bin/noip2 -K pid terminate client pid
Have more than one internet access device?
/usr/local/bin/noip2 -M -c file start additional instances
###########################################################################
HOW TO START THE CLIENT
The noip2 executable can be run by typing /usr/local/bin/noip2
If you want it to run automatically when the machine is booted, then
place the following script in your startup directory. (/etc/init.d/rcX.d
or /sbin/init.d/rcX.d or ???)
#######################################################
#! /bin/sh
# . /etc/rc.d/init.d/functions # uncomment/modify for your killproc
case "$1" in
start)
echo "Starting noip2."
/usr/local/bin/noip2
;;
stop)
echo -n "Shutting down noip2."
killproc -TERM /usr/local/bin/noip2
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
exit 0
#######################################################
Where the 'X' in rcX.d is the value obtained by running the
following command
grep initdefault /etc/inittab | awk -F: '{print $2}'
Killproc can be downloaded from ftp://ftp.suse.com/pub/projects/init
Alternatively, you can uncomment the line after #! /bin/sh
If you have a recent RedHat version, you may want to use the startup script
supplied by another user. It's in this package called redhat.noip.sh
It may need some modification for your system.
There is a startup script for Debian called debian.noip2.sh.
It also has been supplied by another user and is rumored to fail in some
situations.
Here is a script which will kill all running copies of noip2.
#!/bin/sh
for i in `noip2 -S 2>&1 | grep Process | awk '{print $2}' | tr -d ','`
do
noip2 -K $i
done
These four lines can replace 'killproc' and 'stop_daemon' in the other scripts.
If you are behind a firewall, you will need to allow port 8245 (TCP) through
in both directions.
#######################################################################
IMPORTANT!! Please set the permissions correctly on your executable.
If you start noip2 using one of the above methods, do the following:
chmod 700 /usr/local/bin/noip2
chown root:root /usr/local/bin/noip2
If you start noip2 manually from a non-root account, do the chmod 700 as
above but chown the executable to the owner:group of the non-root account, and
you will need to substitute your new path if the executable is not in
/usr/local/bin.
###########################################################################
SAVED STATE
Noip2 will save the last IP address that was set at no-ip.com when it ends.
This setting will be read back in the next time noip2 is started. The
configuration data file must be writable for this to happen! Nothing
happens if it isn't, the starting 0.0.0.0 address is left unchanged.
###########################################################################
BSD USING A TUN DEVICE
Recent BSD systems will use getifaddrs() to list ALL interfaces. Set the
'bsd_wth_getifaddrs' define in the Makefile if using a version of BSD
which supports getifaddrs() and ignore the rest of this paragraph.
Otherwise set the 'bsd' define.
The 'bsd' setting will not list the tun devices in BSD. Therefore a tun
device cannot be selected from the menu. If you want to use a tun device
you will need to edit the Makefile and change the line
${BINDIR}/${TGT} -C -Y -c /tmp/no-ip2.conf
to
${BINDIR}/${TGT} -C -Y -c /tmp/no-ip2.conf -I 'your tun device'
###########################################################################
COMMAND LINE ARGUMENTS WHEN INVOKING THE CLIENT
The client will put itself in the background and run as a daemon. This
means if you invoke it multiple times, and supply the multiple-use flag,
you will have multiple instances running.
If you want the client to run once and exit, supply the '-i IPaddress'
argument. The client will behave well if left active all the time even on
intermittent dialup connections; it uses very few resources.
The actions of the client are controlled by a configuration data file. It is
usually located in /usr/local/etc/no-ip2.conf, but may be placed anywhere if
the '-c new_location' parameter is passed on the startup line.
The configuration data file can be generated with the '-C' parameter.
There are some new command line arguments dealing with default values in the
configuration data file. They are -F, -Y and -U.
The interval between successive testing for a changed IP address is controlled
the '-U nn' parameter. The number is minutes, a minimum of 1 is enforced
by the client when running on the firewall machine, 5 when running behind
a router/firewall. A usual value for clients behind a firewall is 30.
One day is 1440, one week is 10080, one month is 40320, 41760, 43200 or 44640.
One hour is left as an exercise for the reader :-)
The configuration builder code will allow selection among the hosts/groups
registered at no-ip.com for the selected user. The '-Y' parameter will
cause all the hosts/groups to be selected for update.
Some sites have multiple connections to the internet. These sites confuse
the auto NAT detection. The '-F' parameter will force the non-NAT
or "firewall" setting.
The client can be invoked with the '-i IPaddress' parameter which will force
the setting of that address at no-ip.com. The client will run once and exit.
The -I parameter can be used to override the device name in the configuration
data file or to force the supplied name into the configuration data file while
it is being created. Please use this as a last resort!
The '-S' parameter is used to display the data associated with any running
copies of noip2. If nothing is running, it will display the
contents of the configuration data file that is selected. It will then exit.
The '-K process_ID' parameter is used to terminate a running copy of noip2.
The process_ID value can be obtained by running noip2 -S.
The '-M' parameter will permit multiple running copies of the noip2 client.
Each must have it's own configuration file. Up to 4 copies may run
simultaneously.
All errors and informational messages are stored via the syslog facility.
A line indicating a successful address change at no-ip.com is always
written to the syslog. The syslog is usually /var/log/messages.
If the client has been built with debugging enabled, the usual state, the '-d'
parameter will activate the debug output. This will produce a trace of the
running program and should help if you are having problems getting the
connection to no-ip.com established. All errors, messages and I/O in both
directions will be displayed on the stderr instead of syslog.
The additional '-D pid' parameter will toggle the debug state of a running
noip2 process. This will not change where the output of the process is
appearing; if it was going to the syslog, it will still be going to the syslog.
One final invocation parameter is '-h'. This displays the help screen as
shown below and ends.
USAGE: noip2 [ -C [ -F][ -Y][ -U #min]][ -c file]
[ -d][ -D pid][ -i addr][ -S][ -M][ -h]
Version Linux-2.x.x
Options: -C create configuration data
-F force NAT off
-Y select all hosts/groups
-U minutes set update interval
-c config_file use alternate data path
-d increase debug verbosity
-D processID toggle debug flag for PID
-i IPaddress use supplied address
-I interface use supplied interface
-S show configuration data
-M permit multiple instances
-K processID terminate instance PID
-h help (this text)
###########################################################################
HOW TO CONFIGURE THE CLIENT
The command
noip2 -C
will create configuration data in the /usr/local/etc directory.
It will be stored in a file called no-ip2.conf.
If you can't write in /usr/local/*, or are unable to become root on
the machine on which you wish to run noip2, you will need to include
the '-c config_file_name' on every invocation of the client, including
the creation of the datafile. Also, you will probably need to put the
executable somewhere you can write to. Change the PREFIX= line in the
Makefile to your new path and re-run make install to avoid these problems.
You will need to re-create the datafile whenever your account or password
changes or when you add or delete hosts and/or groups at www.no-ip.com
Each invocation of noip2 with '-C' will destroy the previous datafile.
Other options that can be used here include '-F' '-Y' -U'
You will be asked if you want to run a program/script upon successful update
at no-ip.com. If you specify a script, it should start with #!/bin/sh or
your shell of choice. If it doesn't, you will get the 'Exec format error'
error. The IP address that has just been set successfully will be delivered
as the first argument to the script/program. The host/group name will be
delivered as the second argument.
Some machines have multiple network connections. In this case, you will be
prompted to select the device which connects to outside world. The -I flag
can be supplied to select an interface which is not shown. Typically, this
would be one of the pppx interfaces which do not exist until they are active.
The code will prompt for the username/email used as an account identifier
at no-ip.com. It will also prompt for the password for that account.
The configuration data contains no user-serviceable parts!!
IMPORTANT!! Please set the permissions correctly on the configuration data.
chmod 600 /usr/local/etc/no-ip2.conf.
chown root:root /usr/local/etc/no-ip2.conf.
If you start noip2 manually from a non-root account, do the chmod as
above but chown the no-ip2.conf file to the owner:group of the non-root
account. Make sure the directory is readable!
The program will drop root privileges after acquiring the configuration data
file.
###########################################################################
I would like to see this README.FIRST text translated to other languages.
If you can convert this file from English to another language, please send
the translated file to me. Thank you.
###########################################################################
Bugs should be reported to johna@onevista.com
Email me if you need help, but be aware I have extensive spam filtering.
If your mailserver is blocked, send your message thru no-ip support.
Don't send mail in html; no one will see it.
You can make a trace file and examine it for error messages.
Here's how to do that.
Type: script noip2.out
Type: 'your noip command line with the -d parameter added'
Type: exit
Examine the file noip2.out. Send it to me if you're still puzzled.
johna@onevista.com January 2004
にゃんたろう 拝！
2005年 5月 6日 (金) 22:41:49 JST 作成
server install & setup ver.2 に戻る
Copyright © 2004.-2007. nyantarou All Rights Reserved.