preparation for windows installation

次へ

構成その１

計算機の構成

今回の 計算機の構成は 購入したものに IDE ？ 内蔵 ハードディスクを １ 個 追加した物である。どのようなものか というので 以下に データーを 示し ています。

lspci

まあ見ておきましょう

# lspci
00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
00:0c.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 04)
00:13.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 43)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c)
 

みての通りですが CPU などについて

dmesg

dmesg を 見てみると

Linux version 2.4.31-plamo (root@sv) (gcc version 3.3.6) #3 Sun May 27 23:38:09 JST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000002000000 (usable)
0MB HIGHMEM available.
32MB LOWMEM available.
On node 0 totalpages: 8192
zone(0): 4096 pages.
zone(1): 4096 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hdb3
No local APIC present or hardware disabled
Initializing CPU#0
Detected 267.279 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 532.48 BogoMIPS
Memory: 29364k/32768k available (1604k kernel code, 3016k reserved, 608k data, 136k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU:     After generic, caps: 0080f9ff 00000000 00000000 00000000
CPU:             Common caps: 0080f9ff 00000000 00000000 00000000
CPU: Intel Pentium II (Klamath) stepping 04
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
PCI: Found IRQ 11 for device 00:07.2
PCI: Sharing IRQ 11 with 00:0c.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
Intel(R) PRO/100 Network Driver - version 2.3.43-k1
Copyright (c) 2004 Intel Corporation

PCI: Found IRQ 11 for device 00:0c.0
PCI: Sharing IRQ 11 with 00:07.2
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection

Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x9030-0x9037, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x9038-0x903f, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM FIREBALL ST4.3A, ATA DISK drive
hdb: WDC WD100BA, ATA DISK drive
blk: queue c03781c0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03782fc, I/O limit 4095Mb (mask 0xffffffff)
hdc: HITACHI CDR-8330, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 8418816 sectors (4310 MB) w/81KiB Cache, CHS=524/255/63, UDMA(33)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 19541088 sectors (10005 MB) w/1961KiB Cache, CHS=1216/255/63, UDMA(33)
Partition check:
 hda: hda1 hda2
 hdb: hdb1 hdb2 hdb3
SCSI subsystem driver Revision: 1.00
megaraid: v2.10.8.2 (Release Date: Mon Jul 26 12:15:51 EDT 2004)
libata version 1.10 loaded.
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 136k freed
Adding Swap: 1012084k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,67), internal journal
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 09:52:07 May 28 2007
usb-uhci.c: High bandwidth mode enabled
PCI: Enabling device 00:07.2 (0000 -> 0001)
PCI: Found IRQ 11 for device 00:07.2
PCI: Sharing IRQ 11 with 00:0c.0
usb-uhci.c: USB UHCI at I/O 0x1000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
mice: PS/2 mouse device common for all mice
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik 
hid-core.c: USB HID support drivers
usb.c: deregistering driver hid
usb.c: deregistering driver hiddev
via-rhine.c:v1.10-LK1.1.19  July-12-2003  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
PCI: Found IRQ 10 for device 00:13.0
eth1: VIA VT6102 Rhine-II at 0x7400, 00:90:cc:08:95:7c, IRQ 10.
eth1: MII PHY found at address 8, status 0x7849 advertising 01e1 Link 0001.
e100: eth0 NIC Link is Up 100 Mbps Full duplex
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

では ハードディスクも 見ておこう

hdparm -i /dev/hda

/dev/hda 約 4G の物です

# hdparm -i /dev/hda

/dev/hda:

 Model=QUANTUM FIREBALL ST4.3A, FwRev=A0F.0C00, SerialNo=15472324
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=14848/9/63, TrkSize=32256, SectSize=512, ECCbytes=4
 BuffType=3(DualPortCache), BuffSize=81kB, MaxMultSect=16, MultSect=16
 DblWordIO=no, maxPIO=2(fast), DMA=yes, maxDMA=2(fast)
 CurCHS=14848/9/63, CurSects=8418816, LBA=yes, LBAsects=8418816
 tDMA={min:120,rec:120}, DMA modes: sword0 sword1 sword2 mword0 mword1 mword2 
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4 

hdparm -g /dev/hda

hdparm -i /dev/hdb

/dev/hda 約 10G の物です

# hdparm -i /dev/hdb

/dev/hdb:

 Model=WDC WD100BA, FwRev=P73CA30A, SerialNo=WD-WM929
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=34
 BuffType=3(DualPortCache), BuffSize=1961kB, MaxMultSect=16, MultSect=16
 DblWordIO=no, maxPIO=2(fast), DMA=yes, maxDMA=2(fast)
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=19541088
 tDMA={min:120,rec:120}, DMA modes: mword0 mword1 mword2 
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, PIO modes: mode3 mode4 

hdparm -g /dev/hdb

まあこういう計算機と いう事です。

にゃんたろう 拝！

2007年 6月28日 (木) 22:21:46 JST 作成