構成その１

計算機の構成

今回の計算機の構成は勿論、中古で購入したものに IDE ？内蔵ハードディスクを入れ換え追加した物である。（ハードディスクの故障の為）どのようなものかというので以下にデーターを示しています。

flora370 PC-7TS02-7J0XB

flora370 常陸製の計算機です PC-7TS02-7J0XB

http://www.hitachi.co.jp/Prod/comp/OSD/pc/flora/prod/oldmodel/desktop/spec370ts2.html

モデル名 FLORA 370 TS2
Pentium(R) IIプロセッサ(400/333MHz)モデル
型式 [NT] PC-7TS02-7J0XB
ＣＰＵ(周波数) Pentium(R)IIプロセッサ(400MHz)
キャッシュメモリー 512kB(パイプライン・バーストSRAM,、ECC対応)
メインメモリー標準64MB SDRAM(100MHz対応、ECC対応、最大384MB
ビデオサブシステム ATI Technologies社 RAGE PRO TURBO
ビデオメモリー 4MB(SGRAM)
等

lspci

まあ見ておきましょう

# lspci
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:09.0 Multimedia audio controller: Cirrus Logic CS 4610/11 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
00:0d.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
00:10.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c)

みての通りですが CPU などについて

dmesg

dmesg を見てみると

Linux version 2.4.31-plamo (root@sv) (gcc version 3.3.6) #3 Fri Aug 24 21:51:27 
JST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
 BIOS-e820: 000000000bff0000 - 000000000bff8000 (ACPI data)
 BIOS-e820: 000000000bff8000 - 000000000c000000 (ACPI NVS)
0MB HIGHMEM available.
191MB LOWMEM available.
On node 0 totalpages: 49136
zone(0): 4096 pages.
zone(1): 45040 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda2 ro
No local APIC present or hardware disabled
Initializing CPU#0
Detected 400.919 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 799.53 BogoMIPS
Memory: 191740k/196544k available (1244k kernel code, 4416k reserved, 488k data,116k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU:     After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU:             Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Pentium II (Deschutes) stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x9030-0x9037, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x9038-0x903f, BIOS settings: hdc:DMA, hdd:pio
hda: Hitachi HDS721680PLAT80, ATA DISK drive
hdb: WDC AC310100B, ATA DISK drive
blk: queue c02fb120, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c02fb25c, I/O limit 4095Mb (mask 0xffffffff)
hdc: HITACHI CDR-8335, ATAPI CD/DVD-ROM drive
hdc: Disabling (U)DMA for HITACHI CDR-8335
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/7376KiB Cache, CHS=9729/255/63, UDMA(33)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: task_no_data_intr: status=0x53 { DriveReady SeekComplete Index Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: 19807200 sectors (10141 MB) w/512KiB Cache, CHS=1232/255/63, UDMA(33)
Partition check:
 hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 > hda4
 hdb: hdb1 hdb2 hdb3
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 116k freed
Adding Swap: 506008k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 22:47:02 Aug 24 2007
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:07.2
PCI: Sharing IRQ 10 with 00:10.0
usb-uhci.c: USB UHCI at I/O 0x9000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
mice: PS/2 mouse device common for all mice
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
usb.c: deregistering driver hid
usb.c: deregistering driver hiddev
PCI: Found IRQ 11 for device 00:09.0
CS461x PCI: 83100000[8192]
gameport0: CS461x Gameport speed 1657 kHz
Intel(R) PRO/100 Network Driver - version 2.3.43-k1
Copyright (c) 2004 Intel Corporation

PCI: Found IRQ 10 for device 00:10.0
PCI: Sharing IRQ 10 with 00:07.2
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection

eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.
html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@sa
w.sw.com.sg> and others
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
e100: eth0 NIC Link is Up 100 Mbps Full duplex

ではハードディスクも見ておこう

hdparm -i /dev/hda

/dev/hda 約 80G の物です

# hdparm -i /dev/hda

/dev/hda:

 Model=Hitachi HDS721680PLAT80, FwRev=P21OA8BA, SerialNo=PV6804Z3
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=51
 BuffType=3(DualPortCache), BuffSize=7376kB, MaxMultSect=16, MultSect=16
 DblWordIO=no, maxPIO=2(fast), DMA=yes, maxDMA=2(fast)
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
 tDMA={min:120,rec:120}, DMA modes: mword0 mword1 mword2 
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, PIO modes: mode3 mode4

hdparm -g /dev/hda

# hdparm -g /dev/hda /dev/hda: geometry = 9729/255/63, sectors = 156301488, start = 0

hdparm -i /dev/hdb

/dev/hda 約 9.4G の物です

# hdparm -i /dev/hdb

/dev/hdb:

 Model=WDC AC310100B, FwRev=32.02S32, SerialNo=WD-WT639
 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
 RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=22
 BuffType=3(DualPortCache), BuffSize=512kB, MaxMultSect=16, MultSect=16
 DblWordIO=no, maxPIO=2(fast), DMA=yes, maxDMA=0(slow)
 CurCHS=16383/16/63, CurSects=19807200, LBA=yes, LBAsects=19807200
 tDMA={min:120,rec:120}, DMA modes: mword0 mword1 mword2 
 IORDY=on/off, tPIO={min:160,w/IORDY:120}, PIO modes: mode3 mode4

hdparm -g /dev/hdb

# hdparm -g /dev/hdb /dev/hdb: geometry = 1232/255/63, sectors = 19807200, start = 0

まあこういう計算機という事です。

にゃんたろう拝！

2007年 8月31日 (金) 23:58:20 JST 作成

✈

preparation