起動のデーター
Feb 10 23:00:21 lx syslogd 1.4.1: restart. Feb 10 23:00:21 lx kernel: klogd 1.4.1, log source = /proc/kmsg started. Feb 10 23:00:21 lx kernel: Inspecting /boot/System.map Feb 10 23:00:21 lx kernel: Loaded 17225 symbols from /boot/System.map. Feb 10 23:00:21 lx kernel: Symbols match kernel version 2.4.31. Feb 10 23:00:21 lx kernel: No module symbols loaded. Feb 10 23:00:21 lx kernel: Linux version 2.4.31-plamo (root@lx)\ (gcc version 3.3.6) #14 Fri Feb 10 22:20:20 JST 2006 Feb 10 23:00:21 lx kernel: BIOS-provided physical RAM map: Feb 10 23:00:21 lx kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Feb 10 23:00:21 lx kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Feb 10 23:00:21 lx kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Feb 10 23:00:21 lx kernel: BIOS-e820: 0000000000100000 - 0000000010000000 (usable) Feb 10 23:00:21 lx kernel: BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) Feb 10 23:00:21 lx kernel: 0MB HIGHMEM available. Feb 10 23:00:21 lx kernel: 256MB LOWMEM available. Feb 10 23:00:21 lx kernel: On node 0 totalpages: 65536 Feb 10 23:00:21 lx kernel: zone(0): 4096 pages. Feb 10 23:00:21 lx kernel: zone(1): 61440 pages. Feb 10 23:00:21 lx kernel: zone(2): 0 pages. Feb 10 23:00:21 lx kernel: Kernel command line: root=/dev/sdb5 Feb 10 23:00:21 lx kernel: Initializing CPU#0 Feb 10 23:00:21 lx kernel: Detected 696.987 MHz processor. Feb 10 23:00:21 lx kernel: Console: colour VGA+ 80x25 Feb 10 23:00:21 lx kernel: Calibrating delay loop... 1389.36 BogoMIPS Feb 10 23:00:21 lx kernel: Memory: 256432k/262144k available \ (1399k kernel code, 5324k reserved, 348k data, 272k init, 0k highmem) Feb 10 23:00:21 lx kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Feb 10 23:00:21 lx kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Feb 10 23:00:21 lx kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes) Feb 10 23:00:21 lx kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Feb 10 23:00:21 lx kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Feb 10 23:00:21 lx kernel: CPU: L1 I cache: 16K, L1 D cache: 16K Feb 10 23:00:21 lx kernel: CPU: L2 cache: 256K Feb 10 23:00:21 lx kernel: CPU: Intel Pentium III (Coppermine) stepping 01 Feb 10 23:00:21 lx kernel: Enabling fast FPU save and restore... done. Feb 10 23:00:21 lx kernel: Enabling unmasked SIMD FPU exception support... done. Feb 10 23:00:21 lx kernel: Checking 'hlt' instruction... OK. Feb 10 23:00:21 lx kernel: POSIX conformance testing by UNIFIX Feb 10 23:00:21 lx kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) Feb 10 23:00:21 lx kernel: mtrr: detected mtrr type: Intel Feb 10 23:00:21 lx kernel: PCI: PCI BIOS revision 2.10 entry at 0xed9a0, last bus=1 Feb 10 23:00:21 lx kernel: PCI: Using configuration type 1 Feb 10 23:00:21 lx kernel: PCI: Probing PCI hardware Feb 10 23:00:21 lx kernel: PCI: Probing PCI hardware (bus 00) Feb 10 23:00:21 lx kernel: PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:14.0 Feb 10 23:00:21 lx kernel: PCI: Found IRQ 11 for device 00:0f.0 Feb 10 23:00:21 lx kernel: Limiting direct PCI/PCI transfers. Feb 10 23:00:21 lx kernel: Linux NET4.0 for Linux 2.4 Feb 10 23:00:21 lx kernel: Based upon Swansea University Computer Society NET3.039 Feb 10 23:00:21 lx kernel: Initializing RT netlink socket Feb 10 23:00:21 lx kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Feb 10 23:00:21 lx kernel: Starting kswapd Feb 10 23:00:21 lx kernel: VFS: Disk quotas vdquot_6.5.1 Feb 10 23:00:21 lx kernel: Journalled Block Device driver loaded Feb 10 23:00:21 lx kernel: pty: 256 Unix98 ptys configured Feb 10 23:00:21 lx kernel: Serial driver version 5.05c (2001-07-08) \ with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled Feb 10 23:00:21 lx kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A Feb 10 23:00:21 lx kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A Feb 10 23:00:21 lx kernel: Real Time Clock Driver v1.10f Feb 10 23:00:21 lx kernel: Floppy drive(s): fd0 is 1.44M Feb 10 23:00:21 lx kernel: FDC 0 is a National Semiconductor PC87306 Feb 10 23:00:21 lx kernel: Intel(R) PRO/100 Network Driver - version 2.3.43-k1 Feb 10 23:00:21 lx kernel: Copyright (c) 2004 Intel Corporation Feb 10 23:00:21 lx kernel: Feb 10 23:00:21 lx kernel: PCI: Found IRQ 11 for device 00:0d.0 Feb 10 23:00:21 lx kernel: e100: eth0: Intel(R) PRO/100 Network Connection Feb 10 23:00:21 lx kernel: Hardware receive checksums enabled Feb 10 23:00:21 lx kernel: cpu cycle saver enabled Feb 10 23:00:21 lx kernel: Feb 10 23:00:21 lx kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 Feb 10 23:00:21 lx kernel: ide: Assuming 33MHz system bus speed for PIO\ modes; override with idebus=xx Feb 10 23:00:21 lx kernel: PIIX4: IDE controller at PCI slot 00:14.1 Feb 10 23:00:21 lx kernel: PIIX4: chipset revision 1 Feb 10 23:00:21 lx kernel: PIIX4: not 100%% native mode: will probe irqs later Feb 10 23:00:21 lx kernel: ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:DMA, hdb:pio Feb 10 23:00:21 lx kernel: ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:DMA, hdd:pio Feb 10 23:00:21 lx kernel: hda: WDC WD100BA, ATA DISK drive Feb 10 23:00:21 lx kernel: blk: queue c03232e0, I/O limit 4095Mb (mask 0xffffffff) Feb 10 23:00:21 lx kernel: hdc: Compaq CRD-8400B, ATAPI CD/DVD-ROM drive Feb 10 23:00:21 lx kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Feb 10 23:00:21 lx kernel: ide1 at 0x170-0x177,0x376 on irq 15 Feb 10 23:00:21 lx kernel: hda: attached ide-disk driver. Feb 10 23:00:21 lx kernel: hda: host protected area => 1 Feb 10 23:00:21 lx kernel: hda: 19541088 sectors (10005 MB) w/1961KiB \ Cache, CHS=1292/240/63, UDMA(33) Feb 10 23:00:21 lx kernel: Partition check: Feb 10 23:00:22 lx kernel: hda: hda1 hda2 hda3 < hda5 hda6 > hda4 Feb 10 23:00:22 lx kernel: SCSI subsystem driver Revision: 1.00 Feb 10 23:00:22 lx kernel: PCI: Found IRQ 11 for device 00:0e.0 Feb 10 23:00:22 lx kernel: sym.0.14.0: setting PCI_COMMAND_PARITY... Feb 10 23:00:22 lx kernel: sym.0.14.0: setting PCI_COMMAND_INVALIDATE. Feb 10 23:00:22 lx kernel: sym0: <875> rev 0x4 on pci bus 0 device 14 function 0 irq 11 Feb 10 23:00:22 lx kernel: sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking Feb 10 23:00:22 lx kernel: sym0: SCSI BUS has been reset. Feb 10 23:00:22 lx kernel: scsi0 : sym-2.1.17a Feb 10 23:00:22 lx kernel: blk: queue c1386374, I/O limit 4095Mb (mask 0xffffffff) Feb 10 23:00:22 lx kernel: Vendor: I-O DATA Model: HDXG-S80-1 Rev: 110S Feb 10 23:00:22 lx kernel: Type: Direct-Access ANSI SCSI revision: 02 Feb 10 23:00:22 lx kernel: blk: queue c1386474, I/O limit 4095Mb (mask 0xffffffff) Feb 10 23:00:22 lx kernel: Vendor: I-O DATA Model: HDXG-S80-2 Rev: 110S Feb 10 23:00:22 lx kernel: Type: Direct-Access ANSI SCSI revision: 02 Feb 10 23:00:22 lx kernel: blk: queue c1386574, I/O limit 4095Mb (mask 0xffffffff) Feb 10 23:00:22 lx kernel: Vendor: I-O DATA Model: HDVS-UM40G-1 Rev: 204M Feb 10 23:00:22 lx kernel: Type: Direct-Access ANSI SCSI revision: 02 Feb 10 23:00:22 lx kernel: blk: queue c1386674, I/O limit 4095Mb (mask 0xffffffff) Feb 10 23:00:22 lx kernel: Vendor: I-O DATA Model: HDVS-UM40G-2 Rev: 204M Feb 10 23:00:22 lx kernel: Type: Direct-Access ANSI SCSI revision: 02 Feb 10 23:00:22 lx kernel: blk: queue c1386774, I/O limit 4095Mb (mask 0xffffffff) Feb 10 23:00:22 lx kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Feb 10 23:00:22 lx kernel: Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 Feb 10 23:00:22 lx kernel: Attached scsi disk sdc at scsi0, channel 0, id 3, lun 0 Feb 10 23:00:22 lx kernel: Attached scsi disk sdd at scsi0, channel 0, id 4, lun 0 Feb 10 23:00:22 lx kernel: sym0:0: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 15) Feb 10 23:00:22 lx kernel: SCSI device sda: 78183504 512-byte hdwr sectors (40030 MB) Feb 10 23:00:22 lx kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > Feb 10 23:00:23 lx kernel: sym0:1: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 15) Feb 10 23:00:23 lx kernel: SCSI device sdb: 78183504 512-byte hdwr sectors (40030 MB) Feb 10 23:00:23 lx kernel: sdb: sdb1 sdb2 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 > Feb 10 23:00:23 lx kernel: sym0:3: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 15) Feb 10 23:00:23 lx kernel: SCSI device sdc: 40021632 512-byte hdwr sectors (20491 MB) Feb 10 23:00:23 lx kernel: sdc: sdc1 sdc2 sdc3 sdc4 Feb 10 23:00:23 lx kernel: sym0:4: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 15) Feb 10 23:00:23 lx kernel: SCSI device sdd: 40021632 512-byte hdwr sectors (20491 MB) Feb 10 23:00:23 lx kernel: sdd: sdd1 sdd2 sdd3 Feb 10 23:00:23 lx kernel: Initializing Cryptographic API Feb 10 23:00:23 lx kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Feb 10 23:00:23 lx kernel: IP Protocols: ICMP, UDP, TCP, IGMP Feb 10 23:00:23 lx kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes Feb 10 23:00:23 lx kernel: TCP: Hash tables configured (established 16384 bind 32768) Feb 10 23:00:23 lx kernel: Linux IP multicast router 0.06 plus PIM-SM Feb 10 23:00:23 lx kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Feb 10 23:00:23 lx kernel: kjournald starting. Commit interval 5 seconds Feb 10 23:00:23 lx kernel: EXT3-fs: mounted filesystem with ordered data mode. Feb 10 23:00:24 lx kernel: VFS: Mounted root (ext3 filesystem) readonly. Feb 10 23:00:24 lx kernel: Freeing unused kernel memory: 272k freed Feb 10 23:00:24 lx kernel: Adding Swap: 122872k swap-space (priority -1) Feb 10 23:00:24 lx kernel: Adding Swap: 122856k swap-space (priority -2) Feb 10 23:00:24 lx kernel: Adding Swap: 56296k swap-space (priority -3) Feb 10 23:00:24 lx kernel: Adding Swap: 204776k swap-space (priority -4) Feb 10 23:00:24 lx kernel: Adding Swap: 204776k swap-space (priority -5) Feb 10 23:00:24 lx kernel: Adding Swap: 321292k swap-space (priority -6) Feb 10 23:00:24 lx kernel: Adding Swap: 430880k swap-space (priority -7) Feb 10 23:00:24 lx kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,21), internal journal Feb 10 23:00:27 lx init: Entering runlevel: 3 Feb 10 23:00:31 lx kernel: mice: PS/2 mouse device common for all mice Feb 10 23:00:31 lx kernel: sym0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0 Feb 10 23:00:31 lx kernel: sym0:1: ERROR (81:0) (8-0-0) (f/95/0) @ (scripta 50:f31c0004). Feb 10 23:00:31 lx kernel: sym0: script cmd = 90080000 Feb 10 23:00:31 lx kernel: sym0: \ regdump: da 00 00 95 47 0f 01 0e 00 08 00 00 80 00 0f 02 01 00 00 00 02 ff ff ff. Feb 10 23:00:31 lx kernel: sym0: SCSI BUS reset detected. Feb 10 23:00:31 lx kernel: sym0: SCSI BUS has been reset. Feb 10 23:00:31 lx kernel: sym0:0: ERROR (81:0) (8-0-0) (0/5/0) @ (scripta 48:b9506004). Feb 10 23:00:31 lx kernel: sym0: script cmd = f31c0004 Feb 10 23:00:31 lx kernel: sym0: \ regdump: ca 00 00 05 47 00 00 0e 00 08 00 00 80 00 08 02 00 70 fb 0f 00 ff ff ff. Feb 10 23:00:31 lx kernel: sym0: SCSI BUS reset detected. Feb 10 23:00:31 lx kernel: sym0: SCSI BUS has been reset. Feb 10 23:00:34 lx kernel: sym0: SCSI parity error detected: SCR1=2 DBC=1e000000 SBCL=a7 Feb 10 23:00:34 lx kernel: sym0: suspicious SCSI data while resetting the BUS. Feb 10 23:00:37 lx kernel: sym0: \ dp1,d15-8,dp0,d7-0,rst,req,ack,bsy,sel,atn,msg,c/d,i/o = 0x3a7, expecting 0x100 Feb 10 23:00:37 lx kernel: sym0: SCSI BUS reset detected. Feb 10 23:00:37 lx kernel: sym0: SCSI BUS has been reset. Feb 10 23:00:43 lx exiting on signal 15
Feb 10 23:00:45 lx kernel: e100: eth0 NIC Link is Up 100 Mbps Full duplex
Feb 10 22:59:16 lx init: Switching to runlevel: 0 Feb 10 22:59:21 lx dbskkd-cdb[1303]: end of file detected Feb 10 22:59:21 lx gpm[1209]: imps2: Auto-detected intellimouse PS/2 Feb 10 22:59:23 lx exiting on signal 15 Feb 10 23:00:44 lx syslogd 1.4.1: restart. Feb 10 23:00:45 lx kernel: klogd 1.4.1, log source = /proc/kmsg started. Feb 10 23:00:45 lx kernel: Inspecting /boot/System.map Feb 10 23:00:45 lx kernel: Loaded 17225 symbols from /boot/System.map. Feb 10 23:00:45 lx kernel: Symbols match kernel version 2.4.31. Feb 10 23:00:45 lx kernel: Loaded 18 symbols from 2 modules. Feb 10 23:00:45 lx inetd[1170]: Online and ready (13 sockets) Feb 10 23:00:45 lx sshd[1173]: Server listening on 0.0.0.0 port 22. Feb 10 23:00:45 lx kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Feb 10 23:00:46 lx lpd[1197]: restarted Feb 10 23:00:47 lx gpm[1209]: imps2: Auto-detected intellimouse PS/2 Feb 10 23:00:59 lx login(pam_unix)[1257]: session opened for user nyanco by LOGIN(uid=0) Feb 10 23:01:08 lx dbskkd-cdb[1303]: connect from localhost Feb 10 23:01:46 lx su[1359]: - pts/0 nyanco-root
# ls -l /proc/scsi/ | sed 1d -r--r--r-- 1 root root 0 Feb 10 23:10 scsi dr-xr-xr-x 2 root root 0 Feb 10 23:10 sym53c8xx/ # ls -l /proc/scsi/sym53c8xx/ | sed 1d -rw-r--r-- 1 root root 0 Feb 10 23:10 0 # cat -v /proc/scsi/sym53c8xx/0 Chip sym53c875, device id 0xf, revision id 0x4 On PCI bus 0, device 14, function 0, IRQ 11 Min. period factor 12, Wide SCSI BUS Max. started commands 510, max. commands per LUN 64 # cat -v /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: I-O DATA Model: HDXG-S80-1 Rev: 110S Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: I-O DATA Model: HDXG-S80-2 Rev: 110S Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 03 Lun: 00 Vendor: I-O DATA Model: HDVS-UM40G-1 Rev: 204M Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 04 Lun: 00 Vendor: I-O DATA Model: HDVS-UM40G-2 Rev: 204M Type: Direct-Access ANSI SCSI revision: 02 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
にゃんたろう 拝！
2006年 2月10日 (金) 23:22:04 JST 作成